|Page tools: Print Page Print All|
Special Article - Forthcoming Changes: Industry, Occupation and Status in Employment Data (Nov, 1999)
In current LFS coding, the employer or business name and address is compared with information on the ABS Business Register. Where a matching entry is found, the ANZSIC Group code recorded on the Business Register is assigned to the LFS respondent.
Where there is no matching Business Register entry (about 50% of cases), the respondent’s description of industry is coded manually, using an ANZSIC Alphabetic Coding Index. The Index lists descriptions of primary economic activities and the ANZSIC Industry Group codes to which they are classified.
For some time the ABS has found it costly and difficult to maintain accurate location level information on its Business Register for large, multi-location businesses. On cost-benefit grounds, ABS has decided to cease recording location level data for such entities in certain industries. As a result, the rate of matching responses to the Register is expected to drop to levels that will make the current coding method no longer viable.
From the February 2000 survey onwards, only the respondent’s description of their employer’s or business’s industry will be used to assign an appropriate ANZSIC Group code. After assessing a number of options, the ABS has also decided to introduce computer assisted coding (CAC) in place of manual coding. The system being adopted is similar to that already used for the national Census of Population and Housing.
In the LFS, occupation data are collected for all employed persons in the mid-month of each quarter. Responses are classified according to the Australian Standard Classification of Occupations (ASCO) Second Edition, at the ASCO Unit Group (4 digit code) level.
The LFS asks each employed person to describe, for their main job, the job title and their main tasks or duties. This description is currently coded manually, using an ASCO Alphabetic Coding Index to find the appropriate ASCO Unit Group code. The Index lists descriptions of job titles and activities and the Unit Group codes to which they are classified.
From February 2000, respondents descriptions of their occupation will be assigned an appropriate ASCO Unit Group code using a CAC system. The system is similar to that to be adopted for industry coding, and to that used in the national Census. The CAC system is expected to result in more consistent coding than the current method.
STATUS IN EMPLOYMENT
Status in employment (employee, employer, own account worker, contributing family worker) describes a person’s employment arrangement in relation to their main job. Like industry and occupation data, it is collected in the mid-month of each quarter.
In the LFS, status in employment is based on the person’s self-perception of their relationship to the business in which they work, together with the legal status of the business (if it is the respondent’s own business). Legal status is required because the owner-manager of an incorporated business is classed as an employee, whereas the owner-manager of an unincorporated business is classed as an employer or own account worker. This treatment ensures that LFS data are consistent with Australian National Accounts data.
Respondents are asked whether they work for an employer or in their own business and, if in their own business, the name and address of the business and whether it is a limited liability company. In determining a person’s status in employment, these responses are currently compared with the ABS Business Register. Where a person’s own business is found on the Register, the legal status recorded on the Register is used where it differs from that provided by the respondent.
In line with the industry coding changes described above, from the February 2000 survey, respondents’ answers alone will be used in determining the legal status of a business, that is, without recourse to the Business Register.
IMPACT ON ESTIMATES
As a result of the various changes to coding methods, estimates classified by industry, occupation or status in employment for the February 2000 survey onwards will not be strictly comparable with those for earlier periods.
To assess the likely impact of the changes in coding on estimates classified by industry and occupation, February 1999 survey data for employed persons (some 36,000 respondents, already coded by current methods) were re-coded using the new CAC methods. This approach allows breaks in series to be quantified, and adjustment factors to be estimated. The factors, however, are subject to a number of limitations. These are discussed in more detail in the Adjustment Factors section below. Summary results of the February 1999 survey re-coding are shown below. For both industry and occupation series, the percentage change from the old to the new coding method provides an estimate of the break in series that may be expected in February 2000.
For status in employment data, it was possible to re-estimate for surveys from February 1995 onwards, using the new method. These results are also shown below.
For unemployed persons, the industry and occupation of their last full-time job in the previous two years will also be coded by the CAC method. It is impractical to provide a measure of the impact of the new coding method on these data, mainly because the small numbers involved mean that any estimate of the impact will be subject to impractically high sampling variability.
For employment estimates classified by industry division, the estimated difference in level from the old to the new method varied markedly in size and in statistical significance across the classification.
For example, under the new coding method, employment in Wholesale trade was estimated to be 13% lower, based on the re-coding of February 1999 data. In percentage terms, this was the greatest difference found at the Division level. A significant proportion of responses previously coded to Wholesale trade were coded to Manufacturing and to Retail trade by the new method. The three Subdivisions that comprise Wholesale trade each showed similar falls. There were also significant movements between Manufacturing and Retail trade, resulting in a 5% increase for Manufacturing and a 2% decline in Retail trade.
Other major movements were:
Estimates at the Major Group level generally showed smaller changes than for industry data.
The new coding method resulted in an estimated increase of 4% for employed Associate Professionals, with contributions mainly from: Managers and Administrators; Professionals; and Intermediate Clerical, Sales and Service Workers. In contrast, Elementary Clerical, Sales and Service Workers fell by an estimated 4% under the new method, mainly changing to Intermediate Clerical, Sales and Service Workers.
Status in employment
The re-estimated status in employment data for the period since February 1995 showed that, on average, estimates of employees by the new method were 0.4% lower than under the old method.
For employers, estimates were 8% higher, on average.
For Own account workers, estimates were 0.1% higher on average, while there was no impact on estimates for contributing family workers. All status in employment differences were relatively steady over the analysis period.
As discussed above, the impact of the changes in coding methods to take effect in the February 2000 survey have been estimated by re-coding occupation and industry responses for employed persons in the February 1999 survey.
The re-coding of previous survey data provides an effective and simple means of estimating the impact of the new coding method, and adjusting for it so that comparisons of industry or occupation data before and after the changes can be made easily. However, this method has some limitations.
The factors were estimated for employed persons at the national level, and at the classification level shown. The factors will be less reliable if applied to estimates by State or Territory, sex, full-time/part-time status or other variables, or at lower levels of the industry or occupation classifications.
Adjustment factors estimated from re-coding a single survey (February 1999) may differ from results that might have been obtained by similar estimation for other periods. The estimated factors are likely to be progressively less accurate when applied to successively earlier periods. The adjustment factors are based on responses of employed people in various occupations and industries. For unemployed persons, re-coding responses about their occupation or industry in their last full-time job may have produced dissimilar results. Further, any estimates of change would have been subject to impractically high levels of sampling variability.
Like any LFS data, the estimates of percentage change from old to new coding method and the associated adjustment factors are subject to sampling variability. One measure of that variability is the relative standard error or RSE (see the Technical Notes for more details). Generally, only estimates with an RSE of 25% or less are considered sufficiently reliable for most uses. In the tables below:
The tables below show the estimated percentage change from the old to the new coding method for each industry Division and for each occupation Major Group.
For industry Divisions and occupation Major Groups where the RSE of the estimated percentage change was less than 50%, an Adjustment factor is also shown. Employment estimates for periods prior to February 2000 may be multiplied by the appropriate factor for comparison with those for February 2000 and later surveys. Where no factor is shown, no adjustment is needed.
For example, in February 1999, there were 429,500 employed persons in Agriculture, forestry and fishing. For that Division, the factor shown is 1.018. The February 1999 result multiplied by that factor (i.e. 429,500 ´ 1.018 = 437,200) may reasonably be compared with February 2000 data when released.
Inquiries about the coding changes and the adjustment factors should be made to Tim Carlton on Canberra (02) 6252 6128, email email@example.com.
For more information about Labour Force Survey estimates classified by industry, occupation or status in employment, contact Peter Bradbury on Canberra (02) 6252 6565, email firstname.lastname@example.org
These documents will be presented in a new window.