1233.0 - Australian Harmonized Export Commodity Classification (AHECC), Jan 2006  
ARCHIVED ISSUE Released at 11:30 AM (CANBERRA TIME) 17/06/2003   
   Page tools: Print Print Page  


7401Copper mattes; cement copper (precipitated copper)

7402Unrefined copper; copper anodes for electrolytic refining

7403Refined copper and copper alloys, unwrought

7404Copper waste and scrap

7405Master alloys of copper

7406Copper powders and flakes

7407Copper bars, rods and profiles

7408Copper wire

7409Copper plates, sheets and strip, of a thickness exceeding 0.15 mm

7410Copper foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials), of a thickness (excluding any backing) not exceeding 0.15 mm

7411Copper tubes and pipes

7412Copper tube or pipe fittings (for example, couplings, elbows, sleeves)

7413Stranded wire, cables, plaited bands and the like, of copper, not electrically insulated

7414Cloth (including endless bands), grill and netting, of copper wire; expanded metal, of copper

7415Nails, tacks, drawing pins, staples (other than those of 8305) and similar articles, of copper or of iron or steel with heads of copper; screws, bolts, nuts, screw hooks, rivets, cotters, cotter-pins, washers (including spring washers) and similar articles, of copper

7416Copper springs

7417Cooking or heating apparatus of a kind used for domestic purposes, non-electric, and parts thereof, of copper

7418Table, kitchen or other household articles and parts thereof, of copper; pot scourers and scouring or polishing pads, gloves and the like, of copper; sanitary ware and parts thereof, of copper

7419Other articles of copper



NOTE

1. In this Chapter the following have the meanings hereby assigned to them:
    (a) Refined copper

    Metal containing at least 99.85% by weight of copper; or
    Metal containing at least 97.5% by weight of copper, provided that the content by weight of any other element does not exceed the limit specified in the following table:
      TABLE - Other elements

    Element Limiting content % by weight

    AgSilver 0.25
    AsArsenic0.5
    CdCadmium1.3
    CrChromium1.4
    MgMagnesium0.8
    PbLead1.5
    SSulphur0.7
    SnTin 0.8
    TeTellurium0.8
    ZnZinc 1
    ZrZirconium0.3
    Other elements(1), each0.3

    (1) Other elements are, for example, Al, Be, Co, Fe, Mn, Ni, Si.
      (b) Copper alloys

      Metallic substances other than unrefined copper in which copper predominates by weight over each of the other elements, provided that:
        (i) the content by weight of at least one of the other elements is greater than the limit specified in the foregoing table; or

        (ii) the total content by weight of such other elements exceeds 2.5%.
      (c) Master alloys

      Alloys containing with other elements more than 10% by weight of copper, not usefully malleable and commonly used as an additive in the manufacture of other alloys or as de-oxidants, de-sulphurising agents or for similar uses in the metallurgy of non-ferrous metals. However, copper phosphide (phosphor copper) containing more than 15% by weight of phosphorus falls in 2848.
      (d) Bars and rods

      Rolled, extruded, drawn or forged products, not in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width. "Bars and rods" also covers cast or sintered products, of the same forms and dimensions, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.

      Wire-bars and billets with their ends tapered or otherwise worked simply to facilitate their entry into machines for converting them into, for example, drawing stock (wire-rod) or tubes, are however to be taken to be unwrought copper of 7403.
      (e) Profiles

      Rolled, extruded, drawn, forged or formed products, coiled or not, of a uniform cross-section along their whole length, which do not conform to any of the definitions of bars, rods, wire, plates, sheets, strip, foil, tubes or pipes. "Profiles" also covers cast or sintered products, of the same forms, which have been subsequently worked after production (otherwise than by simple trimming or de-scaling), provided that they have not thereby assumed the character of articles or products of other headings.
      (f) Wire

      Rolled, extruded or drawn products, in coils, which have a uniform solid cross-section along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons (including "flattened circles" and "modified rectangles", of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel). Products with a rectangular (including square), triangular or polygonal cross-section may have corners rounded along their whole length. The thickness of such products which have a rectangular (including "modified rectangular") cross-section exceeds one-tenth of the width.

      In the case of 7414, however, "wire" applies only to products, whether or not in coils, of any cross-sectional shape, of which no cross-sectional dimension exceeds 6 mm.
      (g) Plates, sheets, strip and foil

      Flat-surfaced products (other than the unwrought products of 7403), coiled or not, of solid rectangular (other than square) cross-section with or without rounded corners (including "modified rectangles" of which two opposite sides are convex arcs, the other two sides being straight, of equal length and parallel) of a uniform thickness, which are:
      - of rectangular (including square) shape with a thickness not exceeding one-tenth of the width;
      - of a shape other than rectangular or square, of any size, provided that they do not assume the character of articles or products of other headings.

      7409 and 7410 apply, inter alia, to plates, sheets, strip and foil with patterns (for example, grooves, ribs, chequers, tears, buttons, lozenges) and to such products which have been perforated, corrugated, polished or coated, provided that they do not thereby assume the character of articles or products of other headings.
      (h) Tubes and pipes

      Hollow products, coiled or not, which have a uniform cross-section with only one enclosed void along their whole length in the shape of circles, ovals, rectangles (including squares), equilateral triangles or regular convex polygons, and which have a uniform wall thickness. Products with a rectangular (including square), equilateral triangular or regular convex polygonal cross-section, which may have corners rounded along their whole length, are also to be taken to be tubes and pipes provided the inner and outer cross-sections are concentric and have the same form and orientation. Tubes and pipes of the foregoing cross-sections may be polished, coated, bent, threaded, drilled, waisted, expanded, cone-shaped or fitted with flanges, collars or rings.

    SUBHEADING NOTE

    1. In this Chapter the following have the meanings hereby assigned to them:
      (a) Copper-zinc base alloys (brasses)

      Alloys of copper and zinc, with or without other elements. When other elements are present:

      - zinc predominates by weight over each of such other elements;

      - any nickel content by weight is less than 5% (see copper-nickel-zinc alloys (nickel silvers)); and

      - any tin content by weight is less than 3% (see copper-tin alloys (bronzes)).
      (b) Copper-tin base alloys (bronzes)

      Alloys of copper and tin, with or without other elements. When other elements are present, tin predominates by weight over each of such other elements, except that when the tin content is 3% or more the zinc content by weight may exceed that of tin but must be less than 10%.
      (c) Copper-nickel-zinc base alloys (nickel silvers)

      Alloys of copper, nickel and zinc, with or without other elements. The nickel content is 5% or more by weight (see copper-zinc alloys (brasses)).
      (d) Copper-nickel base alloys

      Alloys of copper and nickel, with or without other elements but in any case containing by weight not more than 1% of zinc. When other elements are present, nickel predominates by weight over each of such other elements.

    SECTION 15 - BASE METALS AND ARTICLES OF BASE METAL
    CHAPTER 74 - COPPER AND ARTICLES THEREOF

    NOTE: For goods exempt from Export Entry, refer to Explanatory Notes, 1.5 Instructions for Completing an Export Entry.



    Heading no
    HS
    code
    Export Statistical
    Item
    Unit of quantity
      Description

    7401(A)
      COPPER MATTES; CEMENT COPPER (PRECIPITATED COPPER):
      7401.10
      7401.10.00
      T
      - Copper mattes
      7401.20
      7401.20.00
      T
      - Cement copper (precipitated copper)
    7402(A)
      7402.00
      7402.00.00
      T
      UNREFINED COPPER; COPPER ANODES FOR ELECTROLYTIC REFINING
    7403
      REFINED COPPER AND COPPER ALLOYS, UNWROUGHT:
      7403.1
      - Refined copper:
      7403.11
      7403.11.00
      T
      -- Cathodes and sections of cathodes
      7403.12
      7403.12.00
      T
      -- Wire-bars
      7403.13
      7403.13.00
      T
      -- Billets
      7403.19
      7403.19.00
      T
      -- Other
      7403.2
      - Copper alloys:
      7403.21
      7403.21.01
      T
      -- Copper-zinc base alloys (brass)
      7403.22
      7403.22.01
      T
      -- Copper-tin base alloys (bronze)
      7403.23
      7403.23.01
      T
      -- Copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
      7403.29
      7403.29.01
      T
      -- Other copper alloys (other than master alloys of 7405)
    7404
      7404.00
      COPPER WASTE AND SCRAP

      7404.00.12
      7404.00.18

      KG
      KG
      - Refined copper, waste and scrap:
      -- Clean
      -- Other

      7404.00.22
      7404.00.30

      KG
      KG
      - Copper alloys, waste and scrap:
      -- Copper-zinc base alloys (brass)
      -- Other
    7405
      7405.00
      7405.00.00
      KG
      MASTER ALLOYS OF COPPER
    7406
      COPPER POWDERS AND FLAKES:
      7406.10
      7406.10.00
      KG
      - Powders of non-lamellar structure
      7406.20
      7406.20.00
      KG
      - Powders of lamellar structure; flakes
    7407(B)
      COPPER BARS, RODS AND PROFILES:
      7407.10
      - Of refined copper:

      7407.10.22
      7407.10.28
      7407.10.31

      T
      T
      KG
      -- Bars and rods:
      --- Wire rod
      --- Other
      -- Other
      7407.2
      - Of copper alloys:
      7407.21
      -- Of copper-zinc base alloys (brass):
      7407.21.20
      7407.21.31
      KG
      KG
      --- Bars and rods
      --- Other
      7407.22
      7407.22.00
      KG
      -- Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
      7407.29
      7407.29.00
      KG
      -- Other
    7408
      COPPER WIRE:
      7408.1
      - Of refined copper:
      7408.11
      7408.11.00
      T
      -- Of which the maximum cross-sectional dimension exceeds 6 mm
      7408.19
      7408.19.00
      T
      -- Other
      7408.2
      - Of copper alloys:
      7408.21
      7408.21.00
      KG
      -- Of copper-zinc base alloys (brass)
      7408.22
      7408.22.00
      KG
      -- Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
      7408.29
      7408.29.00
      KG
      -- Other
    7409
      COPPER PLATES, SHEETS AND STRIP, OF A THICKNESS EXCEEDING 0.15 MM:
      7409.1
      - Of refined copper:
      7409.11
      7409.11.00
      T
      -- In coils
      7409.19
      7409.19.00
      T
      -- Other
      7409.2
      - Of copper-zinc base alloys (brass):
      7409.21
      7409.21.00
      KG
      -- In coils
      7409.29
      7409.29.00
      KG
      -- Other
      7409.3
      - Of copper-tin base alloys (bronze):
      7409.31
      7409.31.00
      KG
      -- In coils
      7409.39
      7409.39.00
      KG
      -- Other
      7409.40
      7409.40.00
      KG
      - Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
      7409.90
      7409.90.00
      KG
      - Of other copper alloys
    7410
      COPPER FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS) OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.15 MM:
      7410.1
      - Not backed:
      7410.11
      7410.11.00
      KG
      -- Of refined copper
      7410.12
      7410.12.00
      KG
      -- Of copper alloys
      7410.2
      - Backed:
      7410.21
      7410.21.00
      KG
      -- Of refined copper
      7410.22
      7410.22.00
      KG
      -- Of copper alloys
    7411
      COPPER TUBES AND PIPES:
      7411.10
      7411.10.00
      KG
      - Of refined copper
      7411.2
      - Of copper alloys:
      7411.21
      7411.21.00
      KG
      -- Of copper-zinc base alloys (brass):
      7411.22
      7411.22.00
      KG
      -- Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)
      7411.29
      7411.29.00
      KG
      -- Other
    7412
      COPPER TUBE OR PIPE FITTINGS (FOR EXAMPLE, COUPLINGS, ELBOWS, SLEEVES):
      7412.10
      7412.10.00
      KG
      - Of refined copper
      7412.20
      7412.20.00
      KG
      - Of copper alloys
    7413
      7413.00
      7413.00.00
      KG
      STRANDED WIRE, CABLES, PLAITED BANDS AND THE LIKE, OF COPPER, NOT ELECTRICALLY INSULATED
    7414
      CLOTH (INCLUDING ENDLESS BANDS), GRILL AND NETTING, OF COPPER WIRE; EXPANDED METAL OF COPPER:
      7414.20
      7414.20.00
      SM
      - Cloth
      7414.90
      7414.90.01
      SM
      - Other
    7415
      NAILS, TACKS, DRAWING PINS, STAPLES (OTHER THAN THOSE OF 8305) AND SIMILAR ARTICLES, OF COPPER OR OF IRON OR STEEL WITH HEADS OF COPPER; SCREWS, BOLTS, NUTS, SCREW HOOKS, RIVETS, COTTERS, COTTER-PINS, WASHERS (INCLUDING SPRING WASHERS) AND SIMILAR ARTICLES, OF COPPER:
      7415.10
      7415.10.00
      KG
      - Nails and tacks, drawing pins, staples and similar articles
      7415.2
      - Other articles, not threaded:
      7415.21
      7415.21.00
      KG
      -- Washers (including spring washers)
      7415.29
      7415.29.00
      KG
      -- Other
      7415.3
      - Other threaded articles:
      7415.33
      7415.33.00
      KG
      -- Screws; bolts and nuts
      7415.39
      7415.39.00
      KG
      -- Other
    7416
      7416.00
      7416.00.00
      KG
      COPPER SPRINGS
    7417
      7417.00
      7417.00.00
      NR
      COOKING OR HEATING APPARATUS OF A KIND USED FOR DOMESTIC PURPOSES, NON-ELECTRIC, AND PARTS THEREOF, OF COPPER
    7418
      TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES AND PARTS THEREOF, OF COPPER; POT SCOURERS AND SCOURING OR POLISHING PADS, GLOVES AND THE LIKE, OF COPPER; SANITARY WARE AND PARTS THEREOF, OF COPPER:
      7418.1
      - Table, kitchen or other household articles and parts thereof; pot scourers and scouring or polishing pads, gloves and the like:
      7418.11
      7418.11.00
      NR
      -- Pot scourers and scouring or polishing pads, gloves and the like
      7418.19
      7418.19.00
      NR
      -- Other
      7418.20
      7418.20.00
      NR
      - Sanitary ware and parts thereof
    7419
      OTHER ARTICLES OF COPPER:
      7419.10
      7419.10.00
      NR
      - Chain and parts thereof
      7419.9
      - Other:
      7419.91
      7419.91.00
      NR
      -- Cast, moulded, stamped or forged, but not further worked
      7419.99
      7419.99.00
      NR
      -- Other


    (A) Assay of metallic content required (include gold and silver where appropriate). A 'dry' weighting basis must be used.
    (B) For brazing or welding rods and electrodes coated or cored with flux material see 8311.

    ISSUE DATE: 1 JANUARY 2002



    Previous PageNext Page