|Page tools: Print Page Print All RSS Search this Product|
DESIGN OF THE INDEXES
4 The WPIs measure changes over time in the price of wages and salaries unaffected by changes in the quality or quantity of work performed. A range of procedures have been developed to identify and measure quality and quantity changes and ensure that only pure price changes are reflected in the indexes.
5 Price-determining characteristics of the jobs are fixed to ensure that changes in these characteristics do not contribute toward index movements. The following are examples of changes in price-determining characteristics which are not reflected in index movements:
6 Changes in the price of wages and salaries resulting from changes in the composition of the labour market are also excluded from index movements. To achieve this, a longitudinal survey methodology is used to measure a similar sample of jobs over time. Once a business is selected in the sample, it will be expected to provide data for a sample of jobs for a minimum of five years.
WAGE PRICE INDEXES
7 The ordinary time hourly rates of pay indexes that exclude bonuses measure quarterly changes in ordinary time hourly wage and salary rates. Changes in rates of pay reflected in these indexes (i.e. pure price changes) arise from a range of sources including award variations, enterprise and workplace agreements, minimum wage setting, individual contracts and informal arrangements.
8 These indexes are not affected by changes in:
9 The effect of rolling ordinary time penalty payments and allowances into ordinary time hourly rates is excluded from these indexes. However, when overtime penalty payments and non-separable shift allowances are rolled into ordinary time hourly rates, the ordinary time indexes will increase accordingly.
10 The total hourly rates of pay indexes that exclude bonuses are based on a weighted combination of ordinary time hourly wage and salary rates (described in paragraphs 7 and 8) and overtime hourly rates. As a result, the total hourly rates of pay indexes reflect changes in both the ordinary time and overtime hourly rates. However, the effect of changes in the amount of overtime paid at each overtime rate is not shown in these indexes.
11 Only those indexes that exclude bonuses and commissions are pure price indexes because bonus and commission payments can reflect changes in the quality of work performed. No attempt is made to remove this quality element from the indexes that include bonuses and commissions.
SCOPE AND COVERAGE
12 The target population of employers for the WPIs are all employing organisations in Australia (private and public sectors) except:
13 A sample redesign was undertaken and the outcome implemented from the December quarter 2009. A result of this review was to stop collecting data on a quarterly basis from micro businesses (0-4 employment). The size and frequency of pay changes for jobs in micro businesses was found to be the same as businesses with employment of five or more. Therefore, micro businesses are now treated as being out of coverage but remain in scope through their continued inclusion in the expenditure weights used in compiling the WPIs. The introduction of this change does not impact what the indexes are measuring.
14 All employee jobs in the target population of employers are in scope of the WPIs, except the following:
15 As such, full-time, part-time, permanent, casual, managerial and non-managerial jobs are in scope. Costs incurred by employers for work undertaken by self-employed persons such as consultants and subcontractors are out-of-scope, as they do not relate to employee jobs.
16 Information for the WPI is collected each quarter by mail and online questionnaires from a sample survey of private and public sector employers selected from the ABS Business Register. The survey reference date is the last pay period ending on or before the third Friday of the middle month of the quarter. Data for bonuses are collected in respect to those bonuses paid during the three month period ending on the third Friday of the middle month of the quarter.
17 In the first quarter they participate in the survey, each employer selects a sample of jobs from their workplace(s) using sampling instructions provided by the ABS, and provides information for these jobs, including detailed pricing specifications. In subsequent quarters survey respondents are asked to provide details of payments made to the current occupants of these same jobs. It is essential that the same jobs are priced in successive quarters, whether the individual job occupants are the same or not. Approximately 18,000 matched jobs are priced each quarter from the selected employers.
18 The sampling method retains the highest possible common sample of employers over time, and retains the same sampled jobs within those employers where possible. However, it is also necessary to ensure the WPIs continue to be relevant and representative over time. For these reasons, the employer sample is refreshed annually (for the December quarter) in a way that ensures a high proportion of common selections while allowing new employers to be represented in the sample. Refreshing the sample also allows the ABS to control the length of time that small businesses are included in the sample.
19 Between each annual refresh of the employer sample, a small number of employee jobs will be lost from the survey sample because of the closure of some businesses. In addition, some jobs in continuing businesses will be replaced in the sample because of restructuring and other job changes.
20 Expenditure weights are a measure of the relative importance of each elementary aggregate (EA), based on employers' expenditure on wages and salaries. Below the EA level, sample weights applied to each job on the WPI survey indicate the number of jobs in the Australian labour market a particular sampled job represents.
21 Businesses selected in the WPI are assigned sample weights according to the number of similar businesses they represent in their state, industry and sector. Jobs are assigned sample weights according to the number of jobs they represent in that business. The total sample weight for a job is determined by multiplying business and job sample weights together. This total sample weight is the number of jobs in the Australian labour market a particular sampled job represents.
22 The total employment figures for each business in the WPI survey are obtained from providers each September quarter. Job weights are updated based on these employment data and applied to the WPI sample each December quarter. These actions ensure the WPI sample remains representative.
23 Expenditure weights are updated every two years to reflect structural changes in the Australian economy. Once updated, the weights are fixed again, and a new weighting reference period is created. In the following quarters, prices will be compared using this new weighting reference period. This process is referred to as reweighting. Reweighting ensures the index remains relevant.
24 The December quarter 2016 weight update uses wages and salaries expenditure sourced from the 2016 Survey of Employee Earnings and Hours (EEH). The EEH data items used in the December quarter 2016 weight update are: ordinary time earnings and total earnings. These data are price updated to represent current period values for each index. Prior to the December quarter 2016 only EEH total earnings was used in weighting all indexes. This is the item which aligns most closely with the headline WPI series. The use of EEH ordinary time earnings to weight the ordinary time hourly rates of pay indexes improves the conceptual alignment of the expenditure weight to the index. This improvement in alignment has not impacted the indexes. The new weights are available in the Appendix in the publication and as a data cube on the ABS website. The next weight update will occur in the December quarter 2018.
25 When the expenditure weights are updated, the published index numbers will not recommence at 100.0. The series based on the old expenditure weights and that based on the new weights are linked to form a continuous series.
INTERPRETATION OF INDEX NUMBERS
26 Index numbers in this publication measure changes in the price of wages and salaries between the commencement of the series and a later period. Index number levels cannot be compared across states/territories as they do not provide comparative information on the relative levels of labour costs. Similarly, index number levels cannot be compared across sectors or industries. The usefulness of index numbers stems from the fact that index numbers for any two periods can be used to directly calculate the change or movement in the price of labour between the two periods. These movements can be compared across states/territories, sectors or industries.
PERCENTAGE CHANGE AND ROUNDING
27 The published index numbers have been rounded to one decimal place, and the percentage changes (also rounded to one decimal place) are calculated from the rounded index numbers. In some cases, this can result in the percentage change for the total level of a group of indexes being outside the range of the percentage changes for the component level indexes. Seasonally adjusted and trend quarterly estimates are calculated from unrounded original indexes. The percentage changes (rounded to one decimal place) are calculated from the rounded index numbers.
28 Movements in indexes from one period to another can be expressed either as changes in index points or as percentage changes. In this publication, percentage changes are calculated to illustrate three different kinds of movements in indexes:
29 The following example illustrates the method of calculating changes in index points and percentage changes between any two periods:
March quarter 2018 128.2
less March quarter 2017 125.6
Change in index points 2.6
Percentage change 2.6/125.6 x 100 = 2.1%
FINANCIAL YEAR INDEXES
30 Index numbers for financial years are calculated as simple (arithmetic) averages of the four quarterly index numbers for the financial year. As the WPIs were first produced for the September quarter 1997, the first financial year index number that can be calculated is for 1997-98. Consequently, the first percentage change between financial years that can be calculated is between 1997-98 and 1998-99. The following example illustrates the method of calculating the financial year index number for 2016-17:
September quarter 2016 124.6
plus December quarter 2016 125.1
plus March quarter 2017 125.6
plus June quarter 2017 126.1
Financial year 2016-17 501.4/4 = 125.4
31 Percentage changes between the index numbers for any two financial years can be calculated using the method outlined in paragraph 29 above.
SEASONALLY ADJUSTED INDEXES
32 Seasonally adjusted estimates are derived by estimating and removing systematic calendar related effects from the original series. In most economic data these calendar related effects are a combination of the classical seasonal influences (e.g. the effect of the weather, social traditions or administrative practices) plus other kinds of calendar related variations, such as the number of trading days, Easter or the proximity of significant days in the year (e.g. Christmas). In the seasonal adjustment process, both seasonal and other calendar related factors evolve over time to reflect changes in activity patterns. The seasonally adjusted estimates reflect the sampling and non-sampling errors to which the original estimates are subject.
33 The total hourly rates of pay excluding bonuses index is the only index of the WPI that is seasonally adjusted. Institutional effects largely drive the seasonality of this index. Important factors in determining this seasonality are the timing of effect of agreements, the length of these agreements, and the timing of the implementation of significant wage determinations that impact on rates of pay. A significant institutional change in wage setting arrangements can affect the relative level (or trend) and seasonality of the index.
34 Prior to 2006, the Australian Industrial Relations Commission (AIRC) handed down annual Safety Net Review (SNR) decisions which set federal full-time minimum award rates. Since the commencement of the WPI, the SNR has contributed to the level of the index. Most of its impact on the WPI was in the September quarter with some residual effect in the December quarter each year. This impact contributed to the level of seasonality for those quarters. As a result of industrial relations changes associated with Work Choices there was no SNR decision in 2006. The setting of federal minimum wage rates became the responsibility of the Australian Fair Pay Commission (AFPC).
35 The AFPC's first decision was handed down on 26 October 2006 with a date of effect of 1 December 2006. The impact on the WPI of the first AFPC ruling was mainly in the March quarter 2007. From 2007 to 2009, AFPC determinations impacted the December quarter WPI.
36 On 1 July 2009 Fair Work Australia (FWA) began operations as part of a new national workplace relations system underpinned by the Fair Work Act 2009. In June 2010 FWA announced its first annual minimum wage decision and the increase impacted the WPI in the September quarter 2010. Since 2010, minimum wage decisions have taken effect in the September quarter of each year and have resulted in a change of seasonality. To account for the change in timing, the seasonally adjusted and trend series were reanalysed in the September quarter 2010 to remove the influence of the different timing of minimum wage decisions in any year on the WPI.
CONCURRENT SEASONAL ANALYSIS
37 The WPI uses a concurrent seasonal adjustment methodology to derive the adjustment factors. This method uses the original time series available at each reference period to estimate seasonal factors for the current and previous quarters. Concurrent seasonal adjustment is technically superior to the more traditional method of reanalysing seasonal patterns once each year because it uses all available data to fine tune the estimates of the seasonal component each quarter. With concurrent analysis, the seasonally adjusted series are subject to revision each quarter as the estimates of the seasonal factors are improved. In most instances, the only significant revisions will be to the combined adjustment factors for the previous quarter and for the same quarter in the preceding year as the reference quarter (i.e. if the latest quarter is Qt then the most significant revisions will be to Qt-1 and Qt-4). Seasonal patterns are also reanalysed when there are known changes to regular events. This can lead to additional revisions.
38 The ABS uses Autoregressive Integrated Moving Averages (ARIMA) modelling techniques to produce seasonally adjusted estimates. ARIMA modelling is a technique that can be used to extend original estimates beyond the end of a time series. The extended values are temporary, intermediate values that are used internally to improve seasonal adjustment. They do not affect the original estimates and are discarded at the end of the seasonal adjustment process. The use of ARIMA modelling generally results in a reduction in revisions to the seasonally adjusted estimates when subsequent data becomes available. ARIMA modelling in the WPI was introduced in the June quarter 2008. For more information on the details of ARIMA modelling see the feature article 'Use of ARIMA modelling to reduce revisions' in the October 2004 issue of Australian Economic Indicators (cat. no. 1350.0).
39 The trend is a measure of the underlying direction of a series. The ABS trend estimates for the WPI are derived by applying a 7-term Henderson-weighted moving average to all quarters of the respective seasonally adjusted indexes except the first three and last three quarters. Trend estimates are created for these quarters by applying surrogates of the 7-term Henderson weighted moving average to the seasonally adjusted indexes, tailored to each time series. In general, trend estimates give a better indication of underlying behaviour than the seasonally adjusted estimates. Please refer to the ABS Information Paper, A Guide to Interpreting Time Series - Monitoring Trends (cat. no. 1349.0).
40 Increases in minimum wage rates contribute to the relative level (or trend) of the WPI. A review of the seasonally adjusted series was undertaken in the September quarter 2010 to remove the impacts of the different timing of the increases in minimum wage rates. A trend break correction has been applied between the June quarter and the September quarter 2009 to remove the shift in the underlying level as a result of no increase to minimum wage rates being awarded in 2009.
INDEX REFERENCE PERIOD
41 The index reference period of an index series is that period for which the value of the index is set to 100.0. From the September quarter 2009 issue of this publication the wage price indexes are calculated on an index reference period of 2008-09 = 100.0.
REVISIONS TO INDEXES
42 Original index numbers will be released as final figures at the time they are first published. Revisions will only occur in exceptional circumstances. Trend and seasonally adjusted indexes may be revised as extra quarters are included and analysed for seasonal influences (see paragraphs 32 to 40).
43 Users may also wish to refer to the following publications which are available free on the ABS website <https://www.abs.gov.au>:
Information Paper: Update on ANZSIC 2006 Implementation for Labour Price Index, Australia, 2009, (cat. no. 6345.0.55.001)
Consumer Price Index, Australia, (cat. no. 6401.0)
House Price Indexes, Eight Capital Cities, (cat. no. 6416.0)
International Trade Price Indexes, Australia, (cat. no. 6457.0)
Producer Price Indexes, Australia, (cat. no. 6427.0)
Australian Consumer Price Index: Concepts, Sources and Methods, (cat. no. 6461.0)
Producer and International Trade Price Indexes: Concepts, Sources and Methods, (cat no. 6429.0)
Australian Labour Market Statistics, (cat. no. 6105.0)
44 Current publications and other products released by the ABS are listed on the ABS website <https://www.abs.gov.au>. The ABS also issues a daily Release Advice on the website which details products to be released in the week ahead.
ABS DATA AVAILABLE ON REQUEST
45 As well as the statistics included in this and related publications, the ABS may have other relevant data available on request. Inquiries should be made to WPI on Perth (08) 9360 5151 or the National Information and Referral Service on 1300 135 070.
These documents will be presented in a new window.