1301.0 - Year Book Australia, 2004  
ARCHIVED ISSUE Released at 11:30 AM (CANBERRA TIME) 27/02/2004   
   Page tools: Print Print Page  

Australia's native and plantation forests are an important natural resource providing a wide range of products and benefits to the community.

Forests are a reservoir of biological diversity and functioning ecosystems. They provide protection for soils and water resources, and are increasingly being recognised for their potential as carbon sinks. They are the foundation for a broad range of cultural and spiritual experiences for diverse groups of people and a major tourist attraction for Australians and overseas visitors, providing for a vast array of recreational and educational activities. Forests and plantations provide the basis for Australia's forest industries. Employment and wealth flow directly from the wood products derived from the forests, such as sawn timber, fibreboard, plywood and paper, and support a variety of other forest products and services, such as honey, wildflowers, natural oils, gums, resins, medicines, firewood and craft wood.

The Australian Government and the state and territory governments share a vision of ecologically sustainable management of the forest estate that integrates environmental, commercial and community values and uses. These values are embodied in regional forest agreements negotiated in New South Wales, Victoria, Western Australia and Tasmania.

Forest estate

Native forest

A forest is defined by Australia’s National Forest Inventory as an area incorporating all living and non-living components, dominated by trees having usually a single stem and a mature or potentially mature stand height exceeding two metres, and with an existing or potential crown cover of over-storey strata about equal to or greater than 20%. This definition includes Australia’s diverse native forests, regardless of age. It is also sufficiently broad to encompass areas of trees that are sometimes described as woodlands.

Based on this definition, the total area of native forest as at February 2003 is estimated at 162.7 million hectares (ha), which is about 21% of Australia’s land area (table 15.1). Of this area, 121.6 million ha (75%) were on public land and 38.9 million ha (24%) were on private land with the remaining 1% on land of unresolved tenure. Of the publicly owned forests, 75.6 million ha (62%) were on leasehold tenure, 21.5 million ha (17%) were in Nature Conservation Reserves, 13.1 million ha (10%) were on other Crown land and 11.4 million ha (9%) were managed by state forest authorities for multiple uses including wood production, recreation and informal reserves. Taking forested leasehold land together with private freehold forest, some 114.5 million ha, or 70% of Australia’s native forests, were under private management.

15.1 NATIVE FOREST AREAS - December 2002

NSW(a)
Vic.
Qld
SA
WA
Tas.
NT
ACT
Aust.
’000 ha
’000 ha
’000 ha
’000 ha
’000 ha
’000 ha
’000 ha
’000 ha
’000 ha

DOMINANT CANOPY SPECIES

Eucalypt
Tall
3,820
2,465
1,189
1
170
1,129
-
28
8,802
Medium
18,190
3,407
36,023
596
12,400
1,281
11,268
81
83,247
Low
186
519
1,374
1,207
2,646
65
16,643
7
22,648
Mallee
23
1,171
122
6,044
4,969
-
-
-
12,329
Total
22,219
7,562
38,708
7,848
20,186
2,475
27,911
116
127,026
Acacia
1,251
64
6,984
1,939
4,563
74
1,613
-
16,488
Melaleuca
45
97
5,301
1
-
20
1,593
-
7,056
Rainforest
486
16
2,885
-
5
598
224
-
4,214
Casuarina
1,000
4
216
763
40
1
14
(b)-
2,039
Mangrove
3
2
196
19
173
-
355
-
749
Callitris
1,240
56
387
261
-
1
386
1
2,330
Other
415
135
1,059
34
398
(b)-
738
(b)-
2,780
Total
26,658
7,935
55,734
10,866
25,365
3,169
32,836
117
162,680

TENURE

Public
Multiple use forest(c)
2,496
3,311
2,925
5
1,600
1,062
-
(b)-
11,400
Nature Conservation Reserve(d)
4,471
3,050
5,000
3,943
3,805
1,105
12
106
21,491
Other Crown land(e)
1,055
207
1,131
392
9,387
80
890
-
13,143
Leasehold(f)
9,470
46
35,581
5,250
8,920
-
16,313
11
75,591
Total
17,492
6,614
44,638
9,590
23,712
2,247
17,215
117
121,625
Private
8,523
1,298
10,213
822
1,639
922
15,511
-
38,928
Unresolved tenure
643
23
883
454
14
-
110
-
2,127
Total(a)
26,658
7,935
55,734
10,866
25,365
3,169
32,836
117
162,680

(a) NSW figures by forest type yet to be finalised, but total area for NSW is correct.
(b) Area less than 500 ha.
(c) Publicly owned land managed for multiple use including wood production.
(d) Public land on which wood production is excluded (national parks, etc.).
(e) Reserved areas of educational, scientific and other public institutional land, including easements, defence land, and other minor tenure classifications.
(f) Crown land where the right to harvest or clear land must be approved by state/territory governments. Often known as pastoral leases.
Source: Bureau of Rural Sciences, 'National Forest Inventory, 2003'.

Plantations

The combined resource of standing planted forests in Australia was 1.6 million ha planted to December 2002 (table 15.2). Softwood plantations, which are dominated by the exotic species Pinus radiata, represented 60% (988,000 ha). Hardwood plantations, which are almost all native eucalyptus species, mainly the Eucalyptus globulus variety, represented 39% (638,000 ha). The proportion of the estate accounted for by hardwood plantations is continuing to increase, up from 15% in 1994 and 29% in 1999.

A diverse range of ownership arrangements exists in the Australian plantation industry, including a variety of joint venture and annuity schemes between public and private parties. Over time, the area of plantations in public ownership has lessened, while the proportion in private ownership has increased. Just over half of the resource planted since 1990 involved private ownership of land and trees, while only a quarter of the resource planted during this period involved public ownership.

15.2 PLANTATION AREAS - December 2002

NSW
Vic.
Qld
SA
WA
Tas.
NT
ACT
Aust.
Species type
’000 ha
’000 ha
’000 ha
’000 ha
’000 ha
’000 ha
’000 ha
’000 ha
’000 ha

Hardwood
51
143
26
32
248
135
3
(a)-
638
Softwood
271
217
182
117
104
78
4
16
988
Unknown
1
-
(a)-
(a)-
-
-
-
-
2
Total
323
360
208
149
352
213
7
16
1,628

(a) Area less than 500 ha.
Source: Bureau of Rural Sciences, 'National Plantation Inventory, Annual Update, March 2003'.

Farm forestry

Farm forestry generally refers to the incorporation of commercial tree growing into farming systems. This may take the form of smaller scale plantations on farms, timber belts, wind breaks, alleys and wide-spaced plantings, and may also include management of native forest for commercial returns on farms.

Farm forestry is increasingly becoming adopted as part of farm management planning and integrated into existing land uses, not only to supply wood but also to provide a range of benefits such as environmental protection and increased agricultural production.

To date, plantation farm forestry has mostly occurred in higher rainfall regions (greater than 600 mm) where good growth rates can be achieved and there is an existing timber processing industry. Many farmers have also entered into farm forestry by leasing their land or forming joint venture agreements with large-scale forest management companies. In lower rainfall regions, fostering farm forestry uptake and revegetation in general, will become an increasing priority in government programs designed to improve land management and ameliorate environmental degradation, especially salinity and water quality.

The baseline area for plantations owned outright by individuals having total estates less than 1,000 ha (i.e. the small-grower sector) was just on 67,000 ha in 2000, or nearly 5% of Australia’s total plantation estate (Bureau of Rural Sciences, Australia’s State of the Forests Report, 2003). In contrast to the wider plantation estate, which mainly comprised softwoods, the farm forest resource comprised over 60% hardwoods.

The management of private native forests is recognised as an important component of farm forestry, as 24% of Australia’s total native forest area is in private ownership and a further 46% is on privately managed leasehold land.

Wood and paper products

Australia's wood and paper products industries are important components of Australia's primary and secondary industry sectors. They are particularly important in providing economic development and employment in many regions of rural Australia. The industries include hardwood and softwood sawmilling, plywood and panels manufacturing, woodchip production and export, and the pulp and paper industries. In 2000-01, the total sales and service income of the Wood and paper product manufacturing industries was $15.1b, of which Paper and paper product manufacturing contributed $8.0b (table 15.3).

In 2001-02, it is estimated that total roundwood removed from forests remained steady at 24.3 million cubic metres. The removal of broadleaved wood (primarily from native forests) fell 8.6% in 2001-02 to 10.6 million cubic metres, while 7.5% more coniferous wood (mainly from plantations) was removed.

In 2001-02, the value of exports of forest products totalled $2.0b, of which 36% were woodchips and 35% paper and paperboard products. In that year the value of imports of forest products was $3.7b, of which 53% were paper and paperboard products and 12% sawnwood. This indicates a trade deficit in forest products of $1.7b in 2001-02. Australia produces 87% of its sawn timber needs, of which native forests provide 27%, with the balance coming from softwood plantations. Imported sawn timber is mostly Radiata pine from New Zealand and Douglas fir from North America.

The hardwood and softwood sawmilling industries comprise mills of various sizes which process wood into sawn timber and other products such as veneers, mouldings and floorings. The hardwood mills are generally small scale and scattered. The softwood mills are generally larger and more highly integrated with other wood processing facilities. Australia's production of sawn timber increased by 17% in 2001-02 to 4,119,000 cubic metres (table 15.4), of which 73% was softwood.

Other value-added timber products include plywood, wood-based panels and reconstituted wood products. Australian wood-based panels include particleboard, medium density fibreboard, and hardboard made from softwood or hardwood pulp logs, sawmill residues or thinnings.

Pulp and paper mills use roundwood thinnings, low quality logs, harvesting residues and sawmill waste, recycled paper and paperboard to produce a broad range of pulp and paper products. Of the paper and paper products consumed domestically in 2001-02, 39% were imported, with 72% of printing and writing paper coming from overseas. The majority of paper products produced domestically were packaging and industrial paper (58%) along with newsprint, printing and writing papers, and tissue paper. Recycled paper now contributes 54% of the fibre used in the production of all paper and paperboard.

Woodchips are mainly used in the production of Australia's paper and paper products, and the woodchip export industry uses sawmill residues and timber which is unsuitable for sawmilling and not required by the pulp, paper and reconstituted wood products industries. Before the advent of the woodchip export industry, much of this material was left in the forest after logging. Considerable quantities of sawmill waste material, which would otherwise be burnt, are also chipped for local pulpwood-using industries and for export. Up until 1990-91, at least 95% of woodchips exported from Australia had been eucalypt, but since then greater quantities of softwood woodchips have become available from pine plantations. In 2001-02, some 19% of the total value of woodchips exported was from softwood woodchips.

15.3 FOREST AND FOREST PRODUCT INDUSTRIES, Summary of operations - 2000-01

Employment at 30 June(a)
Wages and salaries(b)
Sales and service income(c)
Industry
’000
$m
$m

Forestry and logging
13.4
n.a.
n.a.
Wood and paper product manufacturing(d)
Log sawmilling and timber dressing
Log sawmilling
5.3
134.4
693.5
Wood chipping
0.6
19.4
242.6
Timber resawing and dressing
7.9
297.5
1,633.0
Total
13.9
451.2
2,569.1
Other wood product manufacturing
Plywood and veneer manufacturing
1.0
34.3
157.7
Fabricated wood manufacturing
4.5
190.8
1,158.1
Wooden structural component manufacturing
20.2
562.2
2,623.8
Wood product manufacturing n.e.c.
5.7
147.9
617.4
Total
31.4
935.1
4,557.1
Paper and paper product manufacturing
Pulp, paper and paperboard manufacturing
5.1
296.1
2,662.5
Solid paperboard container manufacturing
2.9
140.3
713.5
Corrugated paperboard container manufacturing
5.9
352.5
2,628.5
Paper bag and sack manufacturing
1.3
42.6
260.7
Paper product manufacturing n.e.c.
4.6
238.3
1,685.7
Total
19.7
1,069.9
7,950.9
Total
65.0
2,456.3
15,077.1
Total forest and wood and paper products
78.4
n.a.
n.a.

(a) Includes working proprietors.
(b) Excludes the drawings of working proprietors.
(c) Sales of goods, whether or not produced by the business, and income from service activities.
(d) Part of manufacturing industry.
Source: Manufacturing Industry, Australia, 2000-01 (8221.0); ABS data available on request, Labour Force Survey.

15.4 PRODUCTION OF WOOD AND SELECTED WOOD PRODUCTS

Commodity
Units
1998-99
1999-2000
2000-01
2001-02

Sawn Australian grown timber
Coniferous(a)
’000 m3
2,338
2,637
2,351
3,011
Broadleaved
’000 m3
1,267
1,346
1,174
1,108
Total
’000 m3
3,606
3,983
3,525
4,119
Hardwood woodchips(b)
’000 t
4,856
6,164
6,402
5,912
Railway sleepers
’000 m3
67
40
n.a.
n.a.
Plywood
’000 m3
169
192
157
201
Unlaminated particle board
’000 m3
902
978
904
965
Medium density fibreboard
’000 m3
495
621
712
732
Wood pulp(b)
’000 t
871
861
895
843
Paper and paperboard
Newsprint(b)
’000 t
405
464
465
395
Printing and writing
’000 t
497
535
554
624
Household and sanitary
’000 t
187
232
204
198
Packaging and industrial
’000 t
1,475
1,605
1,449
1,679

(a) From July 2000, includes railway sleeper production that can no longer be separately identified.
(b) Excludes production of small establishments with fewer than four persons employed, and establishments engaged in non-manufacturing activities but which may carry on, in a minor way, some manufacturing.
Source: Manufacturing Production, Australia (8301.0); Australian Bureau of Agricultural and Resource Economics, 'Australian Forest Products Statistics'.

Management of forests

Land and forest management is the constitutional responsibility of state and territory governments. Each state has a forest authority responsible for the management and control of publicly owned forests, in accordance with the relevant Forestry Acts and Regulations.

The Australian Government Department of Agriculture, Fisheries and Forestry (AFFA) and the Department of the Environment and Heritage (E&H) are the two key agencies with responsibilities relating to forests at the national level. Close liaison is maintained between them on relevant issues. AFFA's main responsibilities are the development of a national approach to forest management; providing advice to government on forest matters; administration of export licensing responsibilities in relation to unprocessed timber; liaison with state, national and international organisations concerned with forestry; and management of policy and program initiatives.

E&H has responsibility for environmental matters relating to forests, and provides policy advice to government on conservation and environmental matters pertaining to Australia's forests, including biological diversity and climate change. The Australian Heritage Commission and Environment Australia have assessment, management and monitoring roles in respect of the national estate, endangered species and environmental impacts in Australia's forests.

AFFA and E&H, in close cooperation with the state and territory governments, and other bodies, were extensively involved in the development of the National Forest Policy Statement and continue to actively participate in ongoing development of Australia's National Forest Inventory. Details of these initiatives and others such as Regional Forest Agreements, the Forestry Industry Structural Adjustment Program and the National Plantation Inventory can be obtained from the AFFA web site, <http://www.daff.gov.au/>.

Research for the forestry, wood and paper industries addresses industrial and environmental forestry including the sustainable management of eucalypt and softwood plantations, tree breeding and genetics, wood properties and quality, forest assessment, and wood and fibre processing and products.

The Commonwealth Scientific and Industrial Research Organisation (CSIRO) plays a major role in undertaking research into a broad range of community and economic issues including landscape degradation, conservation of biodiversity, water quality, renewable energy, greenhouse gas emissions and carbon sequestration, and new product options such as novel composites and environmentally benign preservation methods. CSIRO is also an active participant in five Cooperative Research Centres: Sustainable Production Forestry, Greenhouse Accounting, Functional Communication Surfaces, Plant-based Management of Dryland Salinity, and Innovative Wood Manufacturing.



Previous PageNext Page