6429.0 - Producer and International Trade Price Indexes: Concepts, Sources and Methods, 2014  
Latest ISSUE Released at 11:30 AM (CANBERRA TIME) 12/11/2015   
   Page tools: Print Print Page Print all pages in this productPrint All RSS Feed RSS Bookmark and Share Search this Product



11.1 The Australian Producer Price Indexes (PPIs) and International Trade Price Indexes (ITPIs) measure price change of the outputs and inputs of various industries and products as well as providing economy wide price changes flowing through the stages of production. It is not possible to construct an index which includes every transaction of every product and so the Australian Bureau of Statistics (ABS) selects representative products and transactions and determines their relative importance in calculating overall price movements (refer to Chapters 6 and 7 for information about the chain of representativeness). PPI and ITPI product selections and their weights are fixed over time (refer to Chapters 4 and 10 for information about index calculation), however they cannot remain fixed indefinitely. For ITPIs, product selections and their weights are revised annually based on trade data sourced from International Trade in Goods and Services, Australia (cat. no. 5368.0). Merchandise trade statistics on an international merchandise trade basis are compiled from information submitted by exporters and importers or their agents to the Australian Customs and Border Protection Service.

11.2 Over time producers change the nature and quantity of products they produce or use as inputs, their customers and the conditions of sale. Producers themselves also appear and disappear from the marketplace.

11.3 Maintenance and review programs are required to ensure that price indexes continue to be representative. Maintenance is an on-going activity which targets the price sample within each elementary aggregate and is undertaken in response to changes identified through regular analysis and interactions with providers. Periodic reviews look beyond individual price samples to a wide ranging assessment of structure, weights and methods and are initiated by the ABS to reflect new or emerging challenges across the economy.

11.4 Review strategies are described in relation to the structure of the index, as illustrated in Figure 11.1. Index reviews target the levels of the index at and above the published (or regimen) level. These are undertaken during an update to the weight reference period. Sample reviews assess the components below the regimen level and sample maintenance is concerned with the price sample within each elementary aggregate.



11.5 The division of the price index according to the regimen level is at the centre of the ABS strategy for reviewing and maintaining price samples. The structure and weighting data remain fixed for the price index at the regimen level and above, until such time as a process known as an index review is undertaken.

11.6 The outcome of an index review is a change to the representative industries and products, their relative importance as reflected by their value aggregates, and the way the industries and products relate to each other through classifications and the aggregation structure. Such a review is undertaken as required, since it can be a costly and complex exercise. Index reviews are typically undertaken when new weighting data become available, and when such data indicate significant shifts in patterns of revenue or expenditure. Changes to standard classifications can also trigger the need for a review, although such a review still depends upon the availability of value data categorised under the new classification.

11.7 An index review enables the assessment of the scope and coverage of the index. Index reviews also allow the evaluation and implementation of major changes in concept, and the adoption of methodological advances or changes to international best practice.

11.8 A major review of PPIs and ITPIs commenced in 2011 and was largely implemented in 2012. The review identified a number of topics to be addressed and included a process of consultation with key users. The outcomes of this review covered a range of areas including coverage, weights, classification, presentation and international standards. Review outcomes included:
  • a greater coherence with international frameworks which included moving from a product focus to an industry focus, moving from a net industry basis to a gross industry basis, and renaming some series
  • the ABS increasing the frequency of re–weighting the PPIs in line with international recommendations to update weights at a minimum of once every five years. The ABS will re–weight the individual PPIs and SOP indexes based on the latest available I–O tables
  • full adoption of the Australian and New Zealand Standard Industry Classification (ANZSIC) 2006
  • improvement in coverage through the progressive development and introduction of new indexes
  • re-referencing of all PPIs and ITPIs to the same index reference period.

11.9 Although index reviews are the only activity that changes the weight or structure of an index down to regimen level, they are frequently undertaken simultaneously with sample reviews.


11.10 A sample review examines a single index structure below the regimen level. Such a review can introduce new components, change index structures, split or combine price samples, and incorporate new weights for lower level components. Any new value aggregate data introduced must still sum to the value aggregate at the regimen level.

11.11 The key benefit of the sample review strategy is that it can be carried out in isolation from other parts of the price indexes. Classification, value data and market behaviour need to be determined for only the
branch of the index
being reviewed. For example, a review of the structure of 1132 Ice cream manufacturing, a regimen level index at the 4-digit ANZSIC class, can be undertaken without simultaneously reviewing other ANZSIC classes of Dairy Product manufacturing, such as Milk and Cream processing, or any other component of the Output of the manufacturing industries price index. This means that sample reviews can be done selectively and more often, for more products across more price indexes, when compared to the scale and frequency of an index review.

11.12 The sample review strategy allows reviewing resources to be targeted at those industries of the economy that are undergoing rapid transformation, in terms of what is being produced, how it is being produced, and how it is being sold. This allows indexes to be updated to adequately represent new products, shifts in market share, changes in production function, product substitution, and changes in both customer types and suppliers.

11.13 Sample reviews also allow periodic reassessment of industry pricing mechanisms - the manner in which producers charge for their products - so that the pricing methods detailed in product specifications adequately capture the behaviour in the marketplace. Sample reviews also allow assessment of different pricing methods to reflect emerging international best practise, or to adopt consistently new techniques to price to constant quality.

11.14 The sample review process involves:
  • an assessment and evaluation of issues effecting a price index
  • gathering of information such as international best practice and feedback from users
  • consultation with regulators, industry bodies and providers
  • identification of sources for weight and price data
  • evaluation of potential approaches to price measurement, index and sample design.

11.15 Sample reviews are prioritised by taking into consideration available resources, the relevance of the index and the importance of the index both in terms of its weight within PPI structures and its use as a deflator within the National Accounts.

11.16 Sample reviews make a broad level assessment of specifications in a sample, however the sample review activity itself does not change specifications within an elementary aggregate - this will done in the process of sample maintenance, an activity which is often undertaken simultaneously with sample review.

11.17 Updating specifications, adding different products, removing transactions that are no longer representative, changing providers or changing the micro-index weights are all part of the within-elementary aggregate activity known as sample maintenance.

11.18 Regular updating of micro-index weights is necessary, for example, to reflect changing market share or capture substitution behaviour (producers selling more of their relatively more expensive products). Specifications need to change due to a change in the conditions of sale or the product description (such changes also necessitate a quality adjustment).

11.19 Sample maintenance is undertaken in conjunction with a sample review, however it is usually an activity that is undertaken on a continuous basis, mostly as data are received from providers selected in the Survey of Producer Prices. Such activity changes the contents of the smallest price baskets that contribute to the PPIs and ITPIs. Although sample maintenance can change the weights of specifications within an elementary aggregate, it does not change the value aggregate associated with an elementary aggregate.


11.20 A price index may be described as biased if it produces estimates that depart consistently from the 'true' measure. Forms of bias are outlined below, together with the review and maintenance strategy employed in such situations.

Elementary index bias

11.21 Elementary index bias (or within elementary aggregate (EA) bias) results when the formulae used to compile index numbers at the elementary aggregate level does not allow index movements to appropriately reflect substitution behaviour.

11.22 For example, consider an illustrative model for the output price index, where producers have fixed inputs. Under this model, it is assumed producers aim to sell more higher-priced products as opposed to lower-priced products. This behaviour is revenue maximising (and for fixed inputs revenue maximising is profit maximising, an expected behaviour of producers). A fixed basket price index measuring price changes for this economic model would exhibit bias. This bias arises because the quantities in the basket are fixed, but the behaviour exhibited in the marketplace has producers selling more of the relatively more expensive products - that is, quantities change. The failure of the price index to account for this shift is the extent to which the index is biased.

11.23 For the input price index, consider an illustrative model where producers have fixed outputs. Under this model, it is assumed producers aim to purchase more lower-priced intermediate inputs as opposed to higher-priced products. This behaviour is cost minimising (and for fixed outputs, cost minimising is profit maximising, an expected behaviour of producers). A fixed basket price index measuring price changes for this economic model would exhibit bias. This bias arises because the quantities in the basket are fixed, but the behaviour exhibited in the marketplace has producers purchasing more of the relatively more of the cheaper products - that is, quantities change. The failure of the price index to account for this shift is the extent to which the index is biased.

11.24 There are two strategies that can be adopted to further protect these price indexes from elementary aggregate bias. The first of these strategies is to frequently update the weights in the basket (assuming we are using the Lowe price index, with differentially weighted specifications). This can be achieved through regular sample maintenance.

11.25 The second strategy that can be employed is to adopt a different price index formula that better reflects such behaviour. The Jevons, or geometric mean, price index is a formula that is unbiased if the price behaviour is(footnote 1) , a condition which is not universally applicable for every product.

"Between Component" substitution bias

11.26 Substitution bias arises from using formulae at levels above the elementary aggregates which do not allow for substitution in response to changes in relative prices. Substitution may occur outside elementary aggregates in response to price changes or changes in taste. For example, producers may substitute between natural and synthetic fibres, between steel and ceramic parts for machinery, between wooden and aluminium window frames and so forth. This substitution again results in a quantity shift, and the failure of a fixed basket price index to account for this shift is again the extent to which the index is biased.

11.27 The sample and index review processes described above result in new components and updated weights and are the key mechanism by which the ABS mitigates between component substitution bias. Industry reports, media and other information sources collected by index managers provides an annual picture of change across all products in the PPIs and ITPIs, and assessment of this change allows resources to be targeted to those areas that are most susceptible to this type of bias.

Outlet/Customer biases

11.28 Outlet/Customer biases occur because the transactions in the elementary aggregates are generally fixed to specific suppliers and/or specific customers. In an input price index bias occurs when the price index does not detect when purchasers shift from higher cost suppliers to lower cost suppliers for the same product. In an output price index bias arises when the index does not detect when producers practise price discrimination and shift the sales from customers with lower prices to customers who pay higher prices for the same product.

11.29 The bias that arises due to change in supplier or customer is mitigated in several ways in the PPIs and ITPIs. For the price index: Input to the manufacturing industries (an input price index), prices are generally observed by surveying the purchaser. If the purchaser changes supplier (and pays a lower price) then this is detected in the quarterly Survey of Producer Prices and, after being adjusted for any appropriate quality changes, appears as a movement in the price index. Similarly, for the output price indexes, prices are generally observed by surveying the producer, and any price rises resulting from changes to new customers will similarly appear in the price indexes. Much but not all of the risk of bias is mitigated by this approach to sample selection.

11.30 There are two situations where potential biases can arise. The first is in the price index of Input to the House construction industry. This input price index measures prices paid by builders by surveying the businesses supplying the products rather than the builders themselves. This practise is far more practical and efficient than attempting to survey a sample of individual builders. However, one drawback to this approach is that this price index becomes susceptible to outlet (supplier) substitution bias. For example, if builders begin purchasing from a chain wholesaler outside the sample that offers materials at substantial discount, the price index would exhibit an upward bias.

11.31 The second case where biases arise is where counterpart pricing is utilised. As described in Chapter 8, counterpart pricing is a term used to reflect using a transaction price observed on a pricing basis that differs from the conceptual base of the price index. For example, within the manufacturing price indexes, some suppliers provide the prices they receive for their products and these are included in the input price index. Aside from the appropriateness of the underlying assumptions regarding distributive trade margins, this practise also has the potential to introduce outlet substitution bias, since it does not always detect when purchasers change their point of supply (at lower prices). A similar issue arises when purchasers provide prices for incorporation into an output index (although in this case the bias is more suitably termed ‘customer substitution’).

11.32 Regardless of where such practises occur, the potential for bias is mitigated through index and sample reviews. As detailed above, such reviews measure expenditure and revenue for different products and involve consultation, both with industry bodies and producers themselves. Regular activity of this kind detects changes in sales or purchasing markets and allows price indexes to be updated to reflect the shift in the quantities and revenue/expenditure.

Quality adjustment bias

11.33 Failure to adequately adjust prices to account for changes to quality results in volume changes being inappropriately measured as price changes, with a resulting bias in the price index. Pricing to constant quality, and the mechanisms by which quality adjustments are made, are described in detail in Chapter 9.

11.34 With a set of tools to enable quality adjustments to be made, the remaining risk for quality adjustment bias occurs through failing to detect changes in products or conditions of sale. This risk is mitigated through forms design of the Survey of Producer Prices, and through the initial enrolment process for selected providers. As described above, a key feature of the enrolment process is to convince selected providers of the importance of pricing to constant quality. Capturing the detailed specification of products together with their condition of sale is also protection against quality change, since it allows providers to inform the ABS directly of variations in characteristics.

New products

11.35 The issues surrounding new products were discussed in Chapter 9, which noted that the bias arising from the introduction of new products is exacerbated through delays in introducing such products into the price basket. In the preceding sections both sample reviews and index reviews were described as opportunities to incorporate new products into the price baskets. If such reviews are carried out regularly, the risk from the emergence of new products is substantially mitigated. Index and sample reviews provide further protection against new product bias in that they allow an assessment of market trends and conditions.

Footnote 1 “Unit elasticity” means that quantities respond proportionally to changes in prices, such that value remains constant. For example, if 5 units of a product are sold at $4.00 each, the value is 5 x $4 = $20. If a price rise of 25% to $5.00 sees a commensurate fall of 20% in the units sold, or 1 unit, so that 4 units are exchanged, the total value is then 4 x $5 = $20. In these circumstances, the total value is constant and the product is exhibiting unit elasticity. This approach is used in the PPIs and ITPIs when markets are evolving very quickly, or detailed level value data is unavailable in a timely manner. Such a strategy is often adopted only in those cases where the price behaviour is reasonably matched by the properties of the index formula.
As per the “Choosing an index number formula” section in Chapter 4, other factors aside from elasticity are also useful in determining suitability of index formulae.