3303.0 - Causes of Death, Australia, 2014 Quality Declaration 
ARCHIVED ISSUE Released at 11:30 AM (CANBERRA TIME) 08/03/2016   
   Page tools: Print Print Page Print all pages in this productPrint All

    QUALITY DECLARATION - CAUSES OF DEATH DATA, SUMMARY

INSTITUTIONAL ENVIRONMENT

For information on the institutional environment of the Australian Bureau of Statistics (ABS), including the legislative obligations of the ABS, financing and governance arrangements, and mechanisms for scrutiny of ABS operations, please see ABS Institutional Environment.

Statistics presented in Causes of Death, Australia, 2014 (cat. no. 3303.0) are sourced from death registrations administered by the various state and territory Registrars of Births, Deaths and Marriages. It is a legal requirement of each state and territory that all deaths are registered. Information about the deceased is supplied by a relative or other person acquainted with the deceased, or by an official of the institution where the death occurred on a Death Registration Form. As part of the registration process, information on the cause of death is either supplied by the medical practitioner certifying the death on a Medical Certificate of Cause of Death, or supplied as a result of a coronial investigation.

Death records are provided electronically to the ABS by individual Registrars on a monthly basis. Each death record contains both demographic data and medical information from the Medical Certificate of Cause of Death, where available. Information from coronial investigations are provided to the ABS through the National Coronial Information System (NCIS).

RELEVANCE

The ABS causes of death collection includes all deaths that occurred and were registered in Australia, including deaths of persons whose usual residence is overseas. Deaths of Australian residents that occurred outside Australia may be registered by individual Registrars, but are not included in ABS deaths or causes of death statistics.

From the 2007 reference year, the scope of the collection is:

  • all deaths registered in Australia for the reference year and received by the ABS by the end of the March quarter of the subsequent year; and
  • deaths registered prior to the reference year but not previously received from the Registrar nor included in any statistics reported for an earlier period.

For example, records received by the ABS during the March quarter of 2015 which were initially registered in 2014 or prior (but not forwarded to the ABS until 2015) are assigned to the 2014 reference year. Any registrations relating to 2014 which are received by the ABS after the end of the March 2015 quarter are assigned to the 2015 reference year.

Data in the Causes of Death collection include demographic items as well as Causes of Death information, which is coded according to the International Classification of Diseases (ICD). The ICD is the international standard classification for epidemiological purposes and is designed to promote international comparability in the collection, processing, classification, and presentation of cause of death statistics. The classification is used to classify diseases and causes of disease or injury as recorded on many types of medical records as well as death records. The ICD has been revised periodically to incorporate changes in the medical field. The 10th revision of ICD (ICD-10) is used for the 2014 data.

    Issues for causes of death data:
  • The primary objective of the owner of the source data can differ from the information needs of the statistical users. Registrars of Births, Deaths and Marriages and Coroners have legislative and administrative obligations to meet, as well as being the source of statistics. As a result, the population covered by the source data, the time reference period for some data, and the data items available in the registration system, may not align exactly with the requirements of users of the statistics.
  • There can be differences between the defined scope of the population (i.e. every death occurring in Australia) and the actual coverage achieved by the registration system. Levels of registration can be influenced by external factors and coverage achieved will be influenced by the steps taken by the owners of death registration systems to ensure all deaths are registered. For example, a death certificate may need to be produced in order to finalise certain other legal requirements e.g. finalisation of a person's estate.
  • There are eight different registration systems within Australia. Each jurisdiction's registration system, while similar in many ways, also has a number of differences. These can include the types of data items collected and the definition of those data items, and business processes undertaken within Registries of Births, Deaths and Marriages including coding and quality assurance practices.

TIMELINESS

Causes of Death data are published annually, following the publication of Deaths, Australia (cat. no. 3302.0).

There is a focus on fitness for purpose when causes of death statistics are released. To meet user requirements for accurate causes of death data it is necessary to obtain information from other administrative sources before all information for the reference period is available (e.g. information from finalisation of coronial proceedings to code an accurate cause of death). A balance therefore needs to be maintained between accuracy (completeness) of data and timeliness. ABS provides the data in a timely manner, ensuring that all coding possible can be undertaken with accuracy prior to publication.

In addition, to address the issues which arise through the publication of causes of death data for open coroners cases, these data are now subject to a revisions process. This process enables the use of additional information relating to coroner certified deaths either 12 or 24 months after initial processing. See Explanatory Notes 52-54 and the Causes of Death Revisions, 2012 and 2013 Technical Note in this publication, for further information on the revision process.

    Issues for causes of death data:
  • A balance is maintained between accuracy (completeness) and timeliness, taking into account the different needs of users and maximising the fitness for purpose of the data. Supporting documentation for causes of death statistics should be used to assess the fitness for purpose of the data to ensure informed decisions can be made.
  • The timeliness of administrative information that supports cause of death coding can be impacted by legislative requirements, systems and resources available to maintain/update systems.
  • To meet user requirements for timely data, information from the administrative source may need to be accessed before all relevant information is available (e.g. finalisation of coronial proceedings).

ACCURACY

Non-sample errors are most likely to influence accuracy in datasets which constitute a complete census of the population, such as the Causes of Death collection. Non-sample error arises from inaccuracies in collecting, recording and processing the data. The most significant of these errors are: mis-reported data items; deficiencies in coverage; incomplete records; and processing errors. Every effort is made to minimise non-sample error by working closely with data providers, running quality checks throughout the data processing cycle, training of processing staff, and efficient data processing procedures.

The ABS has implemented a revisions process that applies to all coroner certified deaths registered after 1 January 2006. This is a change from preceding years where all ABS processing of causes of death data for a particular reference period was finalised approximately 13 months after the end of the reference period. The revisions process enables the use of additional information relating to coroner certified deaths as it becomes available over time, resulting in increased specificity of the assigned ICD-10 codes. See Explanatory Notes 52-54 and the Causes of Death Revisions, 2012 and 2013 Technical Note in this publication, for further information on the revision process.
    Issues for causes of death data:
  • Completeness of the dataset e.g. impact of registration lags, processing lags and duplicate records.
  • Extent of coverage of the population (while all deaths are legally required to be registered some cases may not be registered for an extended time, if at all).
  • Some lack of consistency in the application of questions or forms used by administrative data providers.
  • The level of specificity and completeness in coronial reports or doctor's findings on the Medical Certificate of Cause of Death.
  • Errors in the coding of the causes of a death to ICD-10. The majority of cause of death coding is undertaken through an automated coding process, which is estimated to have a very high level of accuracy. Human coding can be subject to error, however the ABS mitigates this risk through rigorous coder training, detailed documentation and instructions for coding complex or difficult cases, and extensive data quality checks.
  • Cases where coronial proceedings remain open at the end of ABS processing for a reference period are potentially assigned a less specific ICD-10 cause of death code.
  • Where coroner certified deaths become closed during the revisions process, additional information is often made available, making more specific coding possible.

COHERENCE

Use of the supporting documentation released with the statistics is important for assessing coherence within the dataset and when comparing the statistics with data from other sources. Changing business rules over time and/or across data sources can affect consistency and hence interpretability of statistical output. The Explanatory Notes in each issue contains information pertinent to this particular release which may impact on comparison over time.

This publication provides additional information on statistics impacted by the revision process. The Causes of Death Revisions, 2012 and 2013 Technical Note in this issue contains information pertinent to coroner certified deaths affected by the revision process.

    Issues for causes of death data:
  • Use of the supporting documentation released with the statistics is important for assessing coherence within the dataset and when comparing the statistics with data from other sources. For example, differences in the scope of collections, classifications used, point in time at which the analysis or coding occurred, availability of information for coding purposes, purpose for which the data/information is being produced, and confidentiality protocols may be different for ABS data and other sources of causes of death information.
  • Changes to questions, scope etc. over time can affect the consistency of data collected over the period, even when the source of the data is the same. These changes can be the result of legislative or program objective changes.
  • The completeness or quality of older versus newer data can also impact on comparisons across time or domains.
  • Statistical concepts for questions are not always suited to the administrative purpose or the means of collection.

INTERPRETABILITY

In 2014, the ABS implemented Iris, a new automated coding software product for assisting in the processing of cause of death data. This software has been used for the 2013 and 2014 cause of death data provided in this publication. With the introduction of new coding software, the ABS also implemented the most up to date versions of the ICD-10 when coding 2013 and 2014 data (using the 2013 and 2015 versions, respectively), and improved a number of coding practices to realign with international best practice. As part of this, the ABS began a review of its method of coding perinatal deaths which, for the 2013 and 2014 data published in this issue, has meant a change to the method used for assigning an underlying cause of death to neonatal deaths. It is advised that data users refer to the below technical notes for further details.

The Causes of Death publication contains detailed Explanatory Notes, Technical Notes, Appendices and a Glossary that provide information on the data sources, terminology, classifications and other technical aspects associated with these statistics.
    Issues for causes of death data:
  • The Causes of Death publication contains detailed Explanatory Notes, Technical Notes, Appendices and a Glossary that provide information on the data sources, terminology, classifications and other technical aspects associated with these statistics.
  • Information on some aspects of statistical quality may be hard to obtain as information on the source data has not been kept over time. This is related to the administrative rather than statistical purpose of the collection of the source data.

ACCESSIBILITY

In addition to the information provided in this publication, a series of data cubes are also available, providing detailed breakdowns by Causes of Death. The ABS observes strict confidentiality protocols as required by the Census and Statistics Act (1905). This may restrict access to data at a very detailed level which is sought by some users.
    Issues for causes of death data:
  • Often an administrative source can provide the basis for statistical information which has a different nature and focus to the source's principal administrative purpose. There may be a reduced focus or availability of funding within the program to ensure the accessibility of information for non-administrative uses.
  • Each jurisdiction has its own legislation governing death registration as well as that governing the coronial process. Jurisdictions also have privacy legislation which governs the accessibility of the statistics.
  • The ABS observes strict confidentiality protocols as required by the Census and Statistics Act (1905). This may restrict access to data at a very detailed level which is sought by some users.


If the information you require is not available from the publication or the data cubes, then the ABS may also have other relevant data available on request. Inquiries should be made to the National Information and Referral Service on 1300 135 070 or by sending an email to client.services@abs.gov.au.

The ABS Privacy Policy outlines how the ABS will handle any personal information that you provide to the ABS.